Resources

Studio Technologies Model 76DA Central Controller

Product Code: ST-M76DA

Key Features
  • AES3 unbalanced digital audio inputs
  • AES3 unbalanced digital and balanced analog audio outputs
  • Bass management capability
  • Configurable downmix
  • Channel mute/solo
  • Level adjustment, reference level, and dim
$8,870.40 inc GST
(Each)
Increase value Decrease value
Qty Each (inc GST) Each
Estimated Lead time 2-4 weeks
  • Features
  • Overview
  • Technical Specs
  • Documents

Studio Technologies Model 76DA Central Controller

As creating and distributing multi-channel surround (5.1) and stereo audio material has become a day-to-day reality, the ability to simply and effectively monitor these sources is imperative for recording, post-production, and broadcast facilities. And with audio-with-picture applications becoming so prevalent, additional monitoring challenges have arisen. Studio Technologies has addressed these needs with the StudioComm for Surround Model 76DA Central Controller and the Model 77 and Model 71 Control Consoles. With digital audio inputs, digital and analog monitor outputs, support for multiple user control surfaces, and an extensive set of operating resources it's a simple task to integrate a monitoring system into virtually any facility. The carefully selected group of features, including surround and stereo inputs, configurable input-signal time delay, multiple pre- and post-fader outputs, configurable downmix and mute/solo functions, and bass management, along with a multi-format sync input, make the system powerful yet simple to operate. And by using the best of contemporary technology, as well as following rigorous design practices, the system's audio quality is excellent.

 

For further information please refer to the attached data sheet.

Warranty

We offer a 3 year warranty on this product from its date of purchase. For more information regarding our support, repair and warranty, please download our Warranty Guide here.

Trade Terms
The above item is non-returnable, unless defective. Please ensure part numbers and descriptions are as required before placing this order. If any confirmation or information is required please contact AV Sales on 1800 00 77 80.

Model 76DA Central Controller

General Audio:
Supported Sample Rates: 32, 44.1, 48, 88.2, 96, 176.4, and 192 kHz
Word Length: 24 bits maximum
Internal Processing: 32 bits
Input-to-Output Latency: two samples (e.g., 0.042 milliseconds @ 48 kHz sample rate)

Digital Audio Inputs: 5 (18 audio channels)
Configuration: two surround (5.1) and three stereo
Type: AES3 unbalanced (75 ohms/1 Vpp)
Connectors: BNC (per IEC 60169-8 Amendment 2)

Sample Rate Conversion (SRC):
Application: available on Stereo Input C
Input Sample Rate Range: 8 to 216 kHz, limited to 1/6 to 6 times the output sample rate
Latency: 1 millisecond, nominal

Sync Source: configured to follow L/R of currently selected input or signal connected to sync input

Sync Input:
Compatible Sources: word clock, DARS (AES11), bi-level video, tri-level video
Jitter: 4 ns pp maximum
Connector: BNC (per IEC 60169-8 Amendment 2)
Termination: 75 ohms, selectable on/off

Digital Monitor Outputs: 16 (eight pairs)
Configuration: organized as two surround (5.1) and two stereo
Dynamic Range: >135 dB
Type: AES3 balanced (110 ohms/5 Vpp) or unbalanced (75 ohms/1 Vpp), selectable
Connector: 25-pin female D-subminiature (DB-25F)

Analog Monitor Outputs: 8
Configuration: organized as one surround (5.1) and one stereo (2-channel)
Type: electronically balanced, source impedance 200 ohms
Nominal Level: 4.0 dBu @ –20 dBFS input source and level control at maximum setting
Maximum Level: 24 dBu into 2000 (2 k) ohms or greater
Frequency Response, Digital Inputs to Analog Monitor Outputs: 10 Hz-20 kHz 0.0/–0.3 dB @ 48 kHz sample rate; –3 dB @ 64 kHz
Distortion (THD N): <0.002%, –1 dBFS, 20-22 kHz, 22 kHz bandwidth
S/N Ratio: 89 dB, ref 4 dBu output
Dynamic Range: >109 dB
Crosstalk: –98 dB at 1 kHz; –97 dB at 16 kHz, ref –1 dBFS input
Connector: 25-pin female D-subminiature (DB-25F)

Configurable Input Delay: 0 to 340 milliseconds @ 48 kHz sample rate (scales up or down depending on actual sample rate)
Post-Fader Monitor Output Level Offsets: each surround and stereo channel independently adjustable in 0.5-dB steps over a ±12-dB range. (Digital and analog outputs associated with a specific channel share the same setting.)

Bass Management:
Supported Sample Rates: 44.1, 48, 88.2, and 96 kHz only
Crossover Frequency and Type: –6 dB @ 40, 50, 60, or 80 Hz, symmetrical for low-pass and high-pass filters, maximally flat
Filter Slope: 12 or 24 dB/octave
Overall Operation: independent on/off selectable for surround and stereo post-fader monitor outputs

Downmix:
Functions: surround to stereo, stereo to mono
Surround to Stereo:
L @ 0 or –3 dB;
R @ 0 or –3 dB;
C @ –3 or –6 dB summed with L and R;
LFE @ full attenuation or –6 dB summed with L and R;
LS @ –3 or –6 dB summed with L;
RS @ –3 or –6 dB summed with R;
C, SUB, LS, and RS monitor outputs mute
Stereo to Mono:
L @ –3 dB summed with R @ –3 dB to C;
L, R, LS, RS, and SUB monitor outputs mute
For a surround input this results in the C output being the sum of L @ –3 or –6 dB, R @ –3 or –6 dB; C @ –3 or –6 dB, LFE @ full attenuation or –6 dB; LS @ –6 or –9 dB, and RS @ –6 or –9 dB.

Control Console Interface:
Type: RS-485, 115.2 kbit/s, 8-1-N
Polling Interval: 50 milliseconds
Power: 12 Vdc, 500 mA maximum
Connector: 9-pin female D-subminiature (DE-9F)

Remote Control Inputs: 2
Functions: remote mute all, remote dim
Type: 5 Vdc logic, activates on closure to system common
Connector: 9-pin female D-subminiature (DE-9F)

AC Mains:
Requirement: 100 to 230 V, 10/–15%, 50/60 Hz, 15 W maximum
Connector: 3-blade, IEC 320 C14-compatible (mates with IEC 320 C13)

Dimensions:
19.00 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
7.00 inches deep (17.8 cm)

Mounting: one space (1U) in a standard 19-inch rack

Weight: 3.6 pounds (1.6 kg)

 

Model 77 Control Console

Application: up to four Model 77 Control Consoles can be connected to a Model 76DA Central Controller

Power: 12 Vdc nominal (9 Vdc minimum), maximum current 100 mA, provided by Model 76DA Central Controller

Control Data:
Type: RS-485
Data Rate/Format: 115.2 kbit/s, 8-N-1
Connector: 9-pin female D-subminiature (DE-9F)

Dimensions (Overall):
7.20 inches wide (18.3 cm)
2.20 inches high (5.6 cm)
5.40 inches deep (13.7 cm)

Weight: 1.7 pounds (0.8 kg)

Products to compare:
Comparing Products
Your browser currently does not support some features required by this site. Please try another browser